Leading Manufacturer of Diamond Cutting Tools Since 1980

Routers

50, 000 rpm 1/4" Collet Chuck. Each unit is fitted with a dust extraction cowl for jig following. Weight 2-1/4 lb. Air comsumption 12 cfm at 90 psi. 1/4" diamond router bit included. Excellent routing up to 1/4" thick laminate. Plain nose cowl available (35-PNC).

DSE50 Air Router (PN# D30-SE50)

Rotary Jigsaw Attachment for D30-SE50 (PN# D35-RJA)

The rotary jigsaw takes the standard 3/16" or 1/4" router bits and attaches to the router in place of the nose cowl. It enables accurate cutting of thin laminates to be carried out. A feature of the attachment is the retractable steel blade which follows the diamond router steadying the cut and allowing complicated shapes to be cut freehand. When a radius becomes too tight for the follower, the follower can be retracted until the maneuver is complete. Fitted with the dust extraction cowl.

The D30-SE50 high speed router was designed to use diamond router bits up to 1/4" diameter. Its vibration free cutting action leaves a chip free edge on any gelcoated part. Whether used in conjunction with a routing jig guide or free hand on a flat surface with the D35-RJA rotary jig guide, you are guaranteed a smooth fast cutting tool.

Back to Air Tools