White Gel Coat
Gel Coat Repair and
Color Matching
Repair Fibreglass
Hot Tubs
Shower Stalls
Recreational Vehicles.
Matching Tips
Over the years we have found that most off-white colors start with a base of OXIDE and then have a slight amount of yellow or brown or black added. That covers about 740 different shades of off white.
As gel coat gets older it fades.  Its not unusual to find a 10 year old boat that has faded to 5 different colors. (RE: deck, transom, interior, port side, and starboard side.)  Different amount of sunlight caused the fading to happen.


The kit contains:
250ml Gelcoat, Catalyst (hardener), 4 Pigments (Reddish Brown, Carbon Black, Iron Oxide Yellow, Chrome Yellow), 2 Pair Latex Gloves, 2 Mixing sticks, 2 Paper mixing cups, 1 sheet Mylar, Colour Chart, and Instruction sheet

Place chart on gel coat to be matched. Next start adding a few drops of pigment. Check mix and repeat until desired colour is achieved.
Just add between 1 and 50 Drops.
These pigments change the color very gradually.  This gives you very accurate control.



OH NO! and it will cost over $750 to repair
or D. I. Y.


The results where just perfect! I can't believe it was that easy.

For  the latest "How To Information" on Gel Coat Repair check out
YouTube and enter Gel Coat Repair